Cleaning the base filter (heat pump only)
Always make sure that you unplug the tumble dryer from the mains before you start any maintenance.
Warning: Do not use Abrasive cleaners, sharp instruments, soap, household cleaner, detergent or flammable fluids. They may damage the tumble dryer and may cause a fire.
CAUTION: The base filter MUST in place and be cleaned after each use.
- 1. Wait for the tumble dryer to cool down before cleaning the base filter.
- 2. Unplug the tumble dryer from the mains power.
- 3.
Locate the maintenance cover.
- 4.
Open the maintenance cover.
- 5.
Release the 2 cover locks which hold the base filter in place.
- 6.
Pull the base filter out.
- 7.
Use your hands or a soft non-abrasive cloth to clean the base filter.
- 8.
Replace the base filter.
- 9.
Lock back into place the 2 cover locks.
- 10.
Close the maintenance cover.
- 11.
Plug the tumble dryer back into the mains power.