1. Place the motor base onto a flat, clean and dry surface.
2. Place the pulp basin onto the motor base, ensure the spout is aligned with the indented side of the motor base.
3. Align the sieve with the motor drive coupling.
Handle the sieve by the top edges, be careful not to touch the sharp bladed teeth on the base.
4. Push down until the sieve clicks into place.
5. Align the ears on the basin cover with the pulp basin, then place the pulp basin cover onto the pulp basin.
6. Raise the locking handle until it locks into place on each side of the basin cover.
7. Push up the non-drip spout cover.
8. Place the juice pitcher lid onto the juice pitcher.
9. Open the locking lid latch.
10. Angle and place the juice pitcher under the juice spout.