• 1. Locate the battery cover screw on the back of the Security Camera.
  • 2. Using the adapter tool, turn the battery cover screw anti-clockwise until it rotates freely.
  • 3. Using the adapter tool gently pry in one direction, lifting the battery cover.
  • 4. Locate the reset button.
  • 5. Press and hold the reset button until the PIR sensor on the front of the Security Camera flashes red.
  • 6. Replace the battery cover.
  • 7. Using the adapter tool turning the battery cover screw clockwise until the battery cover is flush with the Security Camera.
  • 8. When the PIR sensor has stopped flashing, the Security Camera has been reset and reconnected to the Sync Module 2.