• 1. Launch the Blink Home Monitor app on your phone.
  • 2. Touch More.
  • 3. Touch Device Settings.
  • 4. Touch Motion Settings.
  • 5. Touch the Motion Detection toggle to turn motion detection on/off.
  • 6. Move the Motion Sensitivity slider to adjust the sensitivity.
  • 7. Touch Motion Zones.
  • 8. Tap on the sections of the screen which you want to become inactive.
    Gray zones on the photo will become inactive.
  • 9. Touch Update Photo.
  • 10. Touch Reset Activity Zones to clear all the inactive zones.
  • 11. Touch Update Photo.
  • 12. Touch Advanced to magnify the photo, then you can create a more inactive zones.
  • 13. Tap on the sections of the screen which you want to become inactive.
    Gray zones on the photo will become inactive.
  • 14. Touch Update Photo.
  • 15. Touch Privacy Zones to create privacy zones where motion will not be detected or recorded.
  • 16. Select the area of the screen which you want to become privacy zones.
    Gray zones on the photo will become privacy zones. You can have up to two privacy zones
  • 17. Touch Done.
  • 18. To clear the Privacy Zones, touch Motion Zones.
  • 19. Touch Privacy Zones.
  • 20. Touch Reset Privacy Zones.
  • 21. Select the desired option (E.g., NO).
  • 22. The Privacy Zones will reset.
  • 23. Touch Done.
  • 24. Move the Retrigger Time slider to adjust the amount of time the Security Camera waits after capturing a motion before it will record a new one.
  • 25. Touch the Early Notification toggle to turn the early notification option on/off.
  • 26. Touch Save.
  • 27. Any changes will be saved.