Adjust Motion Detection
1. Launch the Blink Home Monitor app on your phone.
2. Touch More.
3. Touch Device Settings.
4. Touch Motion Settings.
5. Touch the Motion Detection toggle to turn motion detection on/off.
6. Move the Motion Sensitivity slider to adjust the sensitivity.
7. Touch Motion Zones.
8. Tap on the sections of the screen which you want to become inactive.
Gray zones on the photo will become inactive.
9. Touch Update Photo.
10. Touch Reset Activity Zones to clear all the inactive zones.
11. Touch Update Photo.
12. Touch Advanced to magnify the photo, then you can create a more inactive zones.
13. Tap on the sections of the screen which you want to become inactive.
Gray zones on the photo will become inactive.
14. Touch Update Photo.
15. Touch Privacy Zones to create privacy zones where motion will not be detected or recorded.
16. Select the area of the screen which you want to become privacy zones.
Gray zones on the photo will become privacy zones. You can have up to two privacy zones
17. Touch Done.
18. To clear the Privacy Zones, touch Motion Zones.
19. Touch Privacy Zones.
20. Touch Reset Privacy Zones.
21. Select the desired option (E.g., NO).
22. The Privacy Zones will reset.
23. Touch Done.
24. Move the Retrigger Time slider to adjust the amount of time the Security Camera waits after capturing a motion before it will record a new one.
25. Touch the Early Notification toggle to turn the early notification option on/off.
26. Touch Save.
27. Any changes will be saved.