Drain Connection – Spigot
1.
A Hose Support Crook is used to suspend the waste pipe on a wall at the required height. Attach this to your waste pipe before fixing it to the wall.
2.
Elevate the waste pipe to a height of between 65cm and 100cm, this allows the waste water to drain away and stop water being let back into the machine.
3.
Check there are no plug or blanking caps covering the end of the waste pipe or spigot connection.
4.
Connect the waste pipe by pushing it firmly on to the waste pipe spigot.
5.
If required, you can secure a waste pipe to the drain connection using an appropriate sized jubilee clip.