Clean the floor head brush roller
Always disconnect the cordless vacuum cleaner from the mains before carrying out any cleaning or maintenance.
To prevent a loss of suction, ensure any removable accessories/filters are assembled and aligned correctly.
- 1.
Press the release button, then pull the floor head away from the extension tube.
- 2. Locate the brush roller release button.
- 3. Push the brush roller release button and push the side of the brush roller up to unlock the brush bar.
- 4. Carefully pull the brush roller out of the floor head.
- 5.
Remove any trapped hair or debris. This can be done by carefully using a pair of scissors if necessary.
- 6. Remove any debris from the floor head.
- 7.
Replace the brush roller.
- 8. Carefully push the side of the brush roller down until it clicks into place.