• 1. From the PS3 XMB Home screen scroll to Settings.
  • 2. Scroll to Network Settings and press the X button.
  • 3. Scroll to Internet Connection Setup and press the X button.
  • 4. If you are using a wired connection make sure you have an Ethernet cable connected, press the X button to continue.
  • 5. Scroll to Custom and press the X button.
  • 6. Scroll to Wireless and press the X button.
  • 7.

    Scroll to Scan and press the X button.

  • 8.

    Scroll to the wireless network you wish to connect to and press the X button.

  • 9.

    Scroll Right on the controller to continue.

  • 10.

    Select a security setting (E.g. WPA-PSK / WPA2-PSK) and press the X button.

  • 11. Press the X button to enter your wireless password.
  • 12. Enter your wireless password and press the Start button.
  • 13.

    Scroll Right on the controller to continue.

  • 14.

    In the IP Address Settings, scroll to Manual and press the X button.

  • 15.

    In the DHCP Host Name, scroll to Do Not Set and press the X button.

  • 16.

    In the DNS Settings, scroll to Automatic and press the X button.

  • 17.

    In the MTU Settings, scroll to Manual and press the X button.

  • 18.

    Scroll to enter the code 1470 and press the X button.

  • 19.

    Select Do Not Use and press the X button.

  • 20.

    Scroll to Disable and press the X button.

  • 21.

    Press the X button to save your settings.

    You will now be able to connect to the PlayStation Network. Note: Once you have successfully connected to the PlayStation Network you will be able to change your MTU setting back to 1500.