• Always make sure that you unplug the Fridge from the mains before you start any maintenance.


    CAUTION: Ensure the fridge is empty before reversing the fridge door.
  • 1. Unplug the fridge from the mains.
  • 2. Remove the hole cover plate on the left hand side of the fridge.
  • 3. Using a flat head screw driver, remove the upper hinge cover.
  • 4. Using a Philips screwdriver, remove the screws that hold the upper hinge.
  • 5. Remove the upper hinge and washer.
  • 6. Carefully lift away the door.
  • 7. Using a 8mm spanner and flat head screwdriver, remove the bolt pin from the lower hinge.
  • 8. Reverse the direction of the bolt pin, then tighten it to the lower hinge, using the 8mm spanner and flat head screwdriver.
  • 9. Remove the short adjustable foot from the right side of the fridge.
  • 10. Using a Philips screwdriver remove the screws and the lower hinge.
  • 11. Remove the long adjustable foot from the left hand side of the fridge.
  • 12. Using a Philips screwdriver remove the screw on the left hand side of the fridge.
  • 13. Using a Philips screwdriver insert the screw into the right hand side of the fridge.
  • 14. Insert the long adjustable foot into the right hand side of the fridge.
  • 15. Using a Philips screwdriver and screws, install the lower hinge onto the left hand side of the fridge
  • 16. Insert the short adjustable foot into the lower hinge.
  • 17. Attach the fridge door to the bolt pin.
  • 18. Close the fridge door.
  • 19. Using a flat head screwdriver, remove the bolt pin cover from the fridge door.
  • 20. Insert the bolt pin cover into the other end of the fridge door.
  • 21. Attach the hole cover plate to the right hand side of the fridge.
  • 22. Attach the washer and upper hinge.
  • 23. Using a Philips screwdriver and screws, secure and tighten the upper hinge.
  • 24. Replace the upper hinge cover.