• Always check the User manual for guidance on the safe use of your Verti Steam Pro.


    DO NOT use horizontally, the Verti Steam Pro has been designed for vertical use only.
    DO NOT aim the Verti Steam Pro at people or animals or steam clothes being worn.


    Remember: You will be working with hot water and steam, so always ensure that all the safety requirements are fully in place before using and please exercise care and caution as you follow the steps in the guide.

  • 1.

    The lint remover attachment should be used in most steaming operations, as it helps capture any condensation that forms on the press plate, and also prevents water spots appearing on the garment. Also it will help lift lint from the garment if the Verti Steam Pro makes light contact with the fabric.

  • 2.

    Unplug the Verti Steam Pro from the mains.

  • 3.

    Attach the lint remover attachment over the steam plate securing using the raised catch located at the front of the top of the unit.

  • 4.

    Push the lint remover attachment onto the bottom edge of the steam plate until it locks into place.

  • 5.

    Use the Verti Steam Pro and lint remover attachment to steam the required garments.

    For more information see the Using the Verti Steam Pro to steam topic.
  • 6.

    To remove the lint remover attachment pull the handle down and then forward.