• Always check the User Manual for guidance on the safe use of your RediKettle before you boil any water.



    CAUTION: Always ensure the RediKettle is on a flat surface and the power cable is positioned in the channel correctly.


    Remember that you will be working with hot water and steam, so always ensure that all the safety requirements are fully in place before you start boiling water.

    Also refer to the Important safety information Topics in this guide.

  • 1.

    Remove the RediKettle from the kettle base.

  • 2.

    Remove the lid by pressing in both lid locks and pull upwards.

  • 3.

    Fill the RediKettle with water up to the desired water level.

    CAUTION: DO NOT fill the RediKettle over the maximum level.

  • 4.

    Replace the lid.

  • 5.

    Place the RediKettle onto the kettle base.

  • 6.

    Plug the kettle base into the mains.

  • 7.

    Press the power button.

  • 8.

    Press the desired temperature button (e.g., 80).

    The RediKettle will BEEP and the selected temperature will illuminate blue informing you that it has started to boil.

  • 9. As the RediKettle cycles through a red light will indicate the current temperature.
  • 10.

    The RediKettle will BEEP and the desired temperature will illuminate red informing you it has reached the temperature and the boiling cycle will end.

  • 11.

    Remove the RediKettle from the kettle base.

  • 12.

    Hold the pouring lock down.

  • 13.

    Carefully pour the water.

    CAUTION: Do not open the lid when pouring water, as there is a risk of scalding from hot water.